Some of parkjet collection that i've found interesting to give it a try (complete discussion and plan). just wanna share. may it move you to build one and share the build as well as your setup.Sukhoi Su-37 Super Flanker Park Jet (Jetset44-RCGroups)
Wing area: 290 sq in
Span: 30.0”
Length: 36.3”
Weight RTF: 22 to 28 oz
Wing loading: 11 to 14 oz/sq ft
Motor: Two Littlescreamers Park Jet (LSPJ)
Battery: Thunder Power 2100 mAh 11.1V Prolite
Prop: APC 6x4 regular and pusher (counter-rotating props)
Current: 36 amps total
Watts: 350 watts total
Power loading: 220 watts/lb
Speed control: Two Castle Creations Thunderbird 18 or Phoenix 25 ESCs
Receiver: Berg 7P
Flight controls: Stabilators (tailerons), rudder (optional), thrust vectoring (optional)
Polaris Seaplane Parkflyer (Jetset44-RCGroups)
Wing area: 343 sq in
Span: 29.0"
Length: 38.4"
Weight RTF: 20 oz
Wing loading: 8.4 oz/sq ft
Motor: Grayson 2212-06
Battery: Thunder Power 2100 mAh 11.1V Prolite
Prop: APC 6x4
Current: 22 amps
Watts: 240 watts
Power loading: 190 watts/lb
Speed control: Grayson 30 amp
Receiver: Berg 7P
Flight controls: Elevator, ailerons, rudder
F-14 Tomcat Park Jet (Jetset44-RCGroups)
Wing area: 220 sq in
Span: 40.7” fully unswept, 24.7” fully swept
Length: 39.8 in
Weight RTF: 22.3 oz as shown painted
Wing loading: 14 oz/ft2
Motor: Himax 2015-4100 with 4.4 gearing
Battery: Thunder Power 11.1V 1320 mAh Lipo
Prop: APC 9x6 SF
Current draw: 12.3 amps static
Power input: 128 watts
Power loading: 100 watts/lb
Radio equipment: Berg 5 receiver, GWS Pico servo (rudder), Hitec HS-55 servos (tailerons), Hitec HS-81MG servo (wing sweep), Phoenix 10 speed control
Flight controls: Tailerons, rudder, wing sweep
JAS 39 Gripen Park Jet (Jetset44-RCGroups)
Wing area: 258 sq in
Span: 23.9 in
Length: 42.3 in
Weight RTF: 16.6 oz as shown unpainted (estimate 17.5 oz painted)
Wing loading: 9.8 oz/ft2
Motor: Himax 2015-4100 with 4.4 gearing
Battery: Etec 11.1V 1200 mAh Lipo
Prop: APC 9x6 SF
Current draw: 11.5 amps static
Power loading: 139 watts/lb
Radio equipment: Berg 5 receiver, GWS Pico and Hitec HS-55 servos, Phoenix 10 speed control
Flight controls: Wing elevons, full-flying canard, rudder
F-15 Eagle Park Jet (Jetset44-RCGroups)
Wing area: 257 sq in
Span: 27.9 in
Length: 42.3 in
Weight RTF: 15.7 oz as shown unpainted (estimate 16.5 oz painted)
Wing loading: 9.2 oz/ft2
Motor: Axi 2208/34
Battery: Etec 11.1V 1200 mAh Lipo
Prop: APC 9x6 SF
Current draw: 9.7 amps
Power loading: 100 watts/lb
Radio equipment: GWS R-6 receiver, GWS Pico and Hitec HS-55 servos, 10 amp ESC
Flight controls: Wing flaperons, full-flying horizontal stabilizer
F/A-18 Hornet Foam Parkflyer (Jetset44-RCGroups)
Wing area: 275 sq in (effective area, which includes the effect of the wing strakes)
Span: 28.4 in
Length: 41.7 in
Weight RTF: 15.6 oz as shown
Wing loading: 8.2 oz/ft2 (based on effective wing area)
Motor: GWS EPS-350 with “C” gearing
Battery: 11.1V 1200 mAh Lipo
Prop: GWS 8x6 SF
Current draw: 9.7 amps
Power loading: 101 watts/lb
Radio equipment: GWS R-6 receiver, GWS Pico and Hitec HS-55 servos, 10 amp ESC
Flight controls: Wing flaperons, full-flying horizontal stabilizer, twin rudders
Materials used: Either 6mm Depron or BlueCore fan fold foam
Wing area: 217 sq in
Span: 28.1”
Length: 46.4”
Weight RTF: 20 to 23 oz
Wing loading: 15 oz/sq ft
Motor: Littlescreamers Super Park Jet
Battery: Thunder Power 2100 mAh 11.1V Prolite
Prop: APC 7x5
Current: 19 amps
Watts: 185 watts
Power loading: 130 watts/lb
Speed control: Castle Creations Phoenix 25
Receiver: Berg 7P
Flight controls: Canard, aft strake flaps, ailerons, rudder (optional)
F/A-22 Raptor Park Jet (Jetset44-RCGroups)
Wing area: 248 sq in
Span: 26.0"
Length: 36.3"
Weight RTF: 16 to 18 oz (estimate)
Wing loading: 10.5 oz/ft2
Motor: Littlescreamers Park Jet Special (LSPJ)
Battery: Thunder Power 1320 mAh 11.1V Prolite
Prop: APC 7x4 (for aerobatics) or 6x5.5 (for speed)
Current: 15 amps
Watts: 150 watts
Power loading: 140 to 150 watts/lb
Flight controls: Stabilator, flaperons, rudder (optional), thrust vectoring (optional)
X-41 Deltastorm (T3chdad - RCGroups)
Length: 30" with motor and prop.
Wingspan: 28"
AUW: 17oz
Power: 2212-06 motor, 30A ESC, 3S 2100mAh 20C (about 230W with a 5.5x4.5 prop)
Paint Scheme: Ukraine SU-27 in honor of my dearly departed Flanker (see my blog).
Paint Used: Anita's All Purpose Acrylic Craft Paint from Hobby Lobby. Finished off with several coats of Minwax Semi-Gloss Polycrylic spray (blue can).
Speed: 134.43kph / 83.53mph (Fastest Doppler result to date).
Canards: Functional via custom mixing with the delta program in my DX7
X-42 Deltastorm II (Vectored Thrust) (T3chdad - RCGroups)
Length: 31" (~787mm) with motor and prop.
Wingspan: 28" (~712mm)
AUW: 25oz (~708g)
Power: Two BP/Suppo/no-name 2208-12 motors each with a 30A ESC, 3S 2100mAh 20C, Counter-rotating 7x5 props trimmed-down to 6x5. All this generates about 280W according to the WattsUp.
Paint Scheme: Inspired from a German ME-109 I built as a kid.
Paint Used: Delta Ceramcoat Acrylic Craft Paint from Hobby Lobby ($1ea). Finished off with several coats of Minwax Semi-Gloss Polycrylic spray (blue can).
Decals: Images found on the intarweb. I printed them on CD/DVD labels with my inkjet, cut them out, and stuck them on before the clear-coating.
Speed: Doppler does not like the two motors and four whistles. I got the screwiest-looking graph I've ever seen in wavoscope. I'd give a ballpark guess of about 65-70mph
Canards: Functional via custom mixing with the delta program in my DX7 (rudder channel)
Thrust Vectoring: Accomplished via four custom mixes in my DX7 (Flap and Gear Channels).
DRONGO: Depron pusher water plane/park flyer (vleisie rcgroup)
Span: 800mm (31.5")
Length: 650mm (25.6")
Flying Weight: 500g (with 2200mah battery)
Power: 2212-06 motor, 6X4E APC prop, 30A ESC and 3S 1800-2200 MAH battery.
CG Position: 13mm (1/2") in front of the wing break.
Elevon control throws:
Elevator: 20mm up, 20mm down, 10% expo. (0.78")
Aileron: 17mm up, 17mm down, 10% expo. (0.67")
Water rudder: maximum travel without binding, 30% expo.
