Martinez V3 Brushless Gimbal for GoPro Hero3

Helping a friend with his brushless gimbals controller is quite an interesting experience. The board came with pin headers not yet soldered to it place. Searching the internet for information regarding how to connect and how to setup the gimbals itself is a challenge. But i managed at the end to get the right settings for used with a GoPro Hero3 on board. For a new technology, brushless gimbals has come to the point where every one can have a great stable aerial videos.

I am not going for the detail step, but just sharing what i've done.

How To - Servo 360 Mod

I get a lot of question as to how i did the servo mod for my rc rover. That is involving modifying a normal 9g servo to be able to turn freely on both direction.
I got the tips from a youtube channel rctestflight which happens to be the same person i got the idea to build the rc rover. The build is really cool (you can ask my son) and the modification needed is simple. Anyone with a spare servo and couple of old broken one could easily make it.

How To - Diy Hinges

Hinges is a must in making your control surfaces working properly. There are many ways of making a hinges on a scratchbuild model aircraft. It is depend on the build material you are using for your build and how strong you want your hinges to hold.
For a basic scratchbuild using compress foam/ foam board, the easiest way is to make a tape hinge. Here i'm going to show you the basic of making a tape hinge for your model aircraft.

DJI Naza-M Quad Using JR DSX9 DSM2

Setting up a DJI Naza-M Quadcopter 330 for a friend using his JR DSX9 DSM2 transmitter. The setting includes basic flight mode switch, RTF-return to home switch, remote gain and IOC- intelligent orientation control switch.
Just wanna share the way i've done it so it could be a guide to others who are searching to setup their own DJI Naza-M using the same transmitter.

Firmware Upgrade for Turnigy Plush 40A

Again a friend of mine giving me a chance to help him with something new to us. Flashing his ESCs with SimonK firmware for his new quadcopter.
All this while i thought all the ESCs were using Atmel processor which can be flash using an USBAsp for Atmel. But after stripping his ESCs of its heatshrink and searching through the internet, seems like i was wrong. His ESCs are using SiLabs chip which is use in almost all the new ESCs design. Thus my searching begin.

What i shared here just some information on how i've done it. I might miss something important so please use this just as additional information for your own use. Do some research and fully understand what your are doing before you proceed.

HK KK2.0 Upgrade to V1.5

A friend of mine had asked for my help to upgrade his Hobbyking KK2.0 board to a v1.5 firmware which has an improved self-leveling algorithm and roll/pitch camera stabilization included. I've done some searching for how to do the upgrading process as what is needed and what to look out for. Again i found that oddcopter.com has what i need to know to get started.

DJI Naza-M Quad Setup Using Er9X

In my previous post regarding Flysky TH-9x Hacked with ER9x i have included the settings that i made for a DJI Naza-M quad in the video. So in this post I'll include those exact settings that i used in the video with a clearer picture. Bare in mind that the settings posted here is what worked for me. There are two model used, which is 1. Flight modes + RTH/Failsafe + Remote Adjustment for Basic and Attitude gain. 2. Flight Modes + RTH/Failsafe + Remote Adjustment for Basic Gain and IOC both Course and Home lock.